D-link Cat 6 UTP Copper Cable indoor

D-link Cat 6 UTP Copper Cable indoor

Dlink Category 6 unshielded twisted pair cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet.

D-Link Category 6 UTP Solid Cable offers the performance characteristics required by the ever-present Category 6 Standard.

D-Link Cat 6 UTP (Unshielded Twisted Pair) copper cable is a type of networking cable used to transmit data and other information between devices such as computers, routers, switches, and other networking equipment. Cat6 cables are designed to support data transmission speeds of up to 10 Gigabits per second (Gbps) over short distances, making them suitable for use in high-speed networks.

UTP cables are made up of multiple strands of copper wire twisted together in pairs. The number of twists per inch helps to reduce interference and crosstalk between the wires, allowing the cable to transmit data more accurately and at higher speeds. Cat6 cables use four pairs of wire, with each pair twisted at a different rate to further reduce interference.

Cat6 UTP copper cables are commonly used in local area networks (LANs), as well as in data centers and other high-speed networking environments. They are also suitable for use in applications where the cables may be subject to interference from other electrical devices, as the twisted wire pairs help to mitigate this effect.

When used in conjunction with Connectix Category 6 Modules and Patch Panels the user will get a link performance exceeding Category 6 Specification requirements.

Cable Applications

• 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T, 10GBASE-T (IEEE802.3)
• 100VG-AnyLAN (IEEE802.12)
• 550 MHz Broadband Video
• Voice, T1, ISDN
• 155/ 622 Mbps ATM
• Power over Ethernet (POE)

CAT6 UTP LSZH Cable enhanced the performance for transmission of high speed data, digital and analogue voice and video (RGB). It supports Gigabit Ethernet (1000 Base-T) standard. Operates at a bandwidth up to 250 Mhz.

• Comply with Cat.6 specifications
• 4-pair unshielded twisted pair (UTP) cable
• 23 AWG solid copper conductor for superior conductivity
• Frequency 250 MHz
• PE insulation
• PE central cross
• FR LSZH Jacket

Specifications

“Category 6 UTP Solid cable Color: Cool Gray 10C
Length type : 305 M
Heat-resistant : 75o
C minimum (Temperature limited)
Flame property : The purpose of the vertical flame test is to screen out flammable wires.
That follow to VW-1 (UL) FT-1 (CSA), either.
Conductor : 23 AWG(0.574 �0.007mm), Multi-cores (Solid)
Conductor Metal : Bare Copper
Insulation Material : HD-PE
OD : 1.00 �0.05mm
Average Thickness : 0.22 mm
Jacket hardness : 45P (90A � 2A, Shore)
Material : PVC UL94V-0
OD : 6mm �0.2
Average Thickness : 0.60 mm “